Monday, August 3, 2009

Close but no cigar

Well I have the exhaust clamps mounted but I am having trouble getting the cross pipe to connect up.

Just going to take time to get it going.

5 comments:

  1. Darn! Is the center coupling getting in the way?
    Is the cross brace you put in wood?
    Can you notch it where it is hitting?

    Got a picture?

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. I need to use a drum sander and carve out a notch for it. I am also going to mount a third exhaust clamp to the other side just to make sure everything stays. With as big and heavy as he is adding a couple more ounces of weight wont hurt.

    ReplyDelete
  4. Not a bad idea.

    Also is there any way to take your T3 head apart and lighten it some more?

    If not you could always use a router through the top or bottom to carve it out and cover it with a piece of styrene.

    ReplyDelete
  5. I've started the concepts for making my own T3. I was wondering if you had the dimensions for the base of your T3? Any help would be appreciated!

    ReplyDelete